KLUDI · KLUDI-ZENTA SL series
KLUDI-ZENTA SL E sensor basin mixer
Sensor basin mixer, 119 × 64 × 126 mm.
- Works by
- Sensor
- Flow at 3 bar
- 5 l/min
- Power
- 6V battery
- Mounting
- Single hole
Order code 3810005
DownloadsDimensioned drawing
More from KLUDI-ZENTA SL (14)
KLUDI-ZENTA SL E sensor basin mixer with preset temperature, battery3810205
KLUDI-ZENTA SL E sensor pillar tap, battery3810505
KLUDI-ZENTA SL E tall sensor basin mixer, battery3810605
KLUDI-ZENTA SL E sensor basin mixer, mains power3820005
KLUDI-ZENTA SL E sensor basin mixer with preset temperature, mains power3820205
KLUDI-ZENTA SL E sensor pillar tap, mains power3820505
KLUDI-ZENTA SL E wall-mounted sensor basin mixer, square plate, 240 mm3840005
KLUDI-ZENTA SL E wall-mounted sensor basin mixer, round plate, 240 mm3840105
KLUDI-ZENTA SL E wall-mounted sensor basin tap, square plate, 240 mm3840205
KLUDI-ZENTA SL E wall-mounted sensor basin tap, round plate, 240 mm3840305
KLUDI-ZENTA SL E wall-mounted sensor basin mixer, square plate, 190 mm3850005
KLUDI-ZENTA SL E wall-mounted sensor basin mixer, round plate, 190 mm3850105
KLUDI-ZENTA SL E wall-mounted sensor basin tap, square plate, 190 mm3850205
KLUDI-ZENTA SL E wall-mounted sensor basin tap, round plate, 190 mm3850305
What sets it apart
Nothing to touch
A sensor turns the water on and off, which keeps the basin area clean in offices, schools and other busy bathrooms.
Water that stops by itself
The flow stops when hands move away, and after two minutes at most, so a tap is never left running.
Technical details
- Length
- 119 mm
- Width
- 64 mm
- Height
- 126 mm
- Works by
- Sensor, no touch
- Power
- 6V lithium battery CR-P2, outside the tap
- Run time
- Stops by itself after about 2 minutes
- Temperature
- Set with a temperature handle
- Flow at 3 bar
- 5 l/min
- Aerator
- M24
- Back-flow protection
- Yes
- Mounting
- Single hole
- Supply
- Flexible hoses G 3/8
- Protection class
- IP65
- Fitting
- Rapid installation set
More details
- With 6V Lithium Battery CR-P2
- Battery external
- Sensor self-adjusting
- Activation optoelectronical
- Optical object registration
- Maximum water run-time ca. 2 minutes
- Safety class IP65
- 1-hole mounted
- Mixing shaft with temperature handle
- Protected against back flow
- Flow rate at 3 bar 5 l/min.
- Flexible hoses G3/8 DVGW approved
- With integrated back flow preventer
- Sieve seal
- Rapid installation set
- Substantial Contribution (SC) possible
From KLUDI. Ask us to confirm before you order.
All finish codes (2)
| Finish | Order code |
|---|---|
| Chrome | 3810005 |
| Matt Black | 3810039 |
You may also like
-
Hansgrohe · Germany
Hansgrohe Vernis Blend Electronic basin mixer
Chrome -
Hansgrohe · Germany
Hansgrohe Focus Electronic basin mixer 130
Chrome -
AXOR · Germany
AXOR Montreux 3-hole wall-mounted basin mixer, lever handles
11 finishesNeeds its basic set in the wall · 10303180 -
AXOR · Germany
AXOR Montreux 3-hole wall-mounted basin mixer, cross handles
11 finishesNeeds its basic set in the wall · 10303180 -
AXOR · Germany
AXOR Montreux 3-hole basin mixer 180, cross handles
11 finishes -
AXOR · Germany
AXOR Montreux 3-hole basin mixer 180, lever handles
11 finishes -
AXOR · Germany
AXOR Montreux 3-hole basin mixer 30
11 finishes -
AXOR · Germany
AXOR Montreux 2-handle basin mixer 210
11 finishes
About KLUDI-ZENTA SL E sensor basin mixer
A basin mixer from KLUDI's Zenta SL range that runs when hands come under the spout and stops when they move away, so nothing is touched. It runs on a 6V lithium battery (CR-P2) and shuts off by itself after about two minutes. The water temperature is set with a temperature handle. KLUDI rates the flow at 5 l/min at 3 bar.
Ask us about this KLUDI product
Leave your name and number, or call +962 6 530 0900.
Our showroom in Amman
Building 165, King Abdullah II Street · +962 6 530 0900
Saturday to Thursday 8:30 to 20:00 (summer hours). Closed on Friday.